Toolbar (Concrete Corbel)

Last modified by Fredrik Lagerström on 2021/09/08 15:01

Concrete Corbel Toolbar.png

  1. New
    Starts a new calculation. This means that everything that has been defined earlier will be deleted.
  2. Open
    Retrieves input data from a previous calculation. A list on saved input data files (that ends with CBS) will be shown.
  3. Save
    Saves input data for the current calculation in a file with the current file name. Save is only to be used after having used Save as.
  4. Print
    Used for printing input data and results.
  5. Geometri & loads
    Shows a picture of current geometry and current loads.
  6. Reinforcement Layout
    Shows a picture of the design results. This option is available if a design has been performed.
  7. Zoom extent
    The picture is fit to the drawing area at its maximum.
  8. Pan
    Makes it possible to move the picture in an optional direction.
  9. Zoom in
    A specified area can be enlarged.
  10. Zoom out
    The picture is diminished stepwise.
  11. Previous view
    Used for toggle back to an earlier zooming mode.
  12. Next view
    Used for toggle back to an earlier zooming mode.
  13. Preview view
    Makes it possible to preview and then also print the graphic picture that is currently active.
  14. Grid
    Shows/hides a grid.
  15. Axes
    Shows/hides the auxiliary axes.
  16. Show info
    Shows program information, version number etc.
Copyright 2023 StruSoft AB
WIN-Statik Wiki