For Educational version, see here.

Concrete Corbel 6.5

6.5.001

Released: 2022-10-28

• New: It is now possible to use Swedish national annex EKS 12, BFS 2022-4. (Case 122085)
• Fix: If the value "x" representing the distance of the vertical load from the corbel edge was to small the error message complained of the value "a" which is corrected (case 109524).
• Fix: The manual has been updated to the latest version. (Case 122757)

6.5.000

Released: 2021-02-26

• Fix: Reduced the number of requested licenses from Concrete Corbel (Case 100274).

Concrete Corbel 6.4

6.4.005

Released: 2018-04-13

• Fix: A limit for the slope  (min 1.0 max 2.5) according to EC2 J3 has been added (case 48053).
• Fix: In some cases no check was made regarding the minimum anchorage length for the reinforcement according to EC2 8.4.4 (8.6)  which has been corrected (case 64007).
• Fix: An example with an extraordinary large corbel width made the progran crasch and resulted also in a negative torsional capacity which has been corrected (case 64117).
• Fix: The way the requred number of links is calculated has been modified (case 64446).

6.4.004

Released: 2015-10-01

• Fix: The result of the compression check was wrongly disabled which have been corrected (case 33440).

6.4.003

Released: 2015-06-26

• Updated license handling (added FlexNet support).

6.4.002

Released: 2014-10-22

• Fix: The decimal on values added through in the graphical user interface were sometimes removed.

6.4.001

Released: 2014-09-11

• Fix: Small corbels with room for no more than one layer of links could exit the calculation prematurely stating illogical geometrical errors (Case 21434).

6.4.000

Released: 2014-04-16

• Fix: Moved all program specific settings and databases to the user profile folder to avoid potential user rights issues.

Concrete Corbel 6.3

6.3.009

Released: 2016-02-05

• New: Added support for the FlexNet license system.

6.3.008

Released: 2014-10-22

• Fix: The decimal on values added through in the graphical user interface were sometimes removed.

6.3.007

Released: 2014-04-14

• Fix: Moved all program specific settings and databases to the user profile folder to avoid potential user rights issues.

6.3.006

Released: 2013-09-09

• It is from now possible to also define a vct value for the concrete where relevant.
• The following concrete qualities C28/35, C32/40, C54/65 and C58/70 have been added.

6.3.005

Released: 2012-12-21

• Updated the installation file to accomodate the new StruSoft Installer.

6.3.004

Released: 2012-10-02

• Updated the way in which the program handles the layout file for the print engine.
• Updated the module responsible for saving program settings and search paths.

6.3.003

Released: 2012-09-07

• Updated the way in which user specific settings and data is stored.

6.3.002

Released: 2012-05-09

• When the cover is too small the program stopped without any message which is corrected.

6.3.001

Released: 2012-02-20

• New version of the license system (version 3.0.18).
• Updates made to the installtion script pertaining to silent install.

6.3.000

Released: 2011-12-22

• A new licensesystem (version 3.0) has been implemented.