For Educational version, see here.

Retaining wall 6.5

6.5.002

Released: 2022-10-28

• New: It is now possible to use Swedish national annex EKS 12, BFS 2022-4. (Case 122087)

6.5.001

Released: 2021-10-19

• Fix: Fixed an error in the header of the Friction slope table (Case 93730).
• Fix: Made sure the Geometry dialog handles input numbers with commas as well as dots (Case 99513)
• Fix: Made result windows resizable (Case 99541)
• Fix: Due to an error the Serviceability check in some cases displayed sections and section forces belonging to the front wall for heel and toe which is corrected (case 109714).
• The manual has been updated (case 110972).

6.5.000

Released: 2021-02-26

• Fix: Some error messages where not translated to english which has been corrected (case 79983).
• Fix: Reduced the number of requested licenses from Retaining Wall (Case 100279).

Retaining wall 6.4

6.4.004

Released: 2019-01-24

• Fix: Settlement warning "Current ground pressure is larger than 1/2 of the ULS capacity. Deformation due to creep have to be considered according to EN 1997-1 6.6.2 (16)" now only pops up for medium and cohesion soil (Case 40472).
• Fix: Program goes into lock down if Settlement license is available on the server but consumed (Case 74105, Case 74106).

6.4.003

Released: 2016-06-03

• New: Updated Swedish national annex concerning minimim reinforcement in slabs, EKS 10 9.3.1.1 (Case 37567).
• Fix: License check for the Settlement module now avoids lockdown mode if license server is currently out of licenses (Case 41697).

6.4.002

Released: 2015-06-26

• Updated license handling (added FlexNet support).

6.4.001

Released: 2014-10-22

• Fix: The decimal on values added through in the graphical user interface were sometimes removed.

6.4.000

Released: 2014-04-16

• Fix: The max allowed crack width for the Swedish annex was not correct which has been adjusted (Case 15868).
• Fix: Moved all program specific settings and databases to the user profile folder to avoid potential user rights issues.

Retaining wall 6.3

6.3.008

Released: 2016-02-05

• New: Added support for the FlexNet license system.

6.3.007

Released: 2014-10-22

• Fix: The decimal on values added through in the graphical user interface were sometimes removed.

6.3.006

Released: 2014-04-14

• Fix: Moved all program specific settings and databases to the user profile folder to avoid potential user rights issues.

6.3.005

Released: 2013-09-09

• A numerical error which made the crack widths calculated according to the old Swedish code BBK in some cases to be 1000 times to large has been corrected.
• The following concrete qualities C28/35, C32/40, C54/65 and C58/70 have been added.

6.3.004

Released: 2013-04-16

• It is from now possible to also define a vct value for the concrete where relevant.
• The following concrete qualities C28/35, C32/40, C54/65 and C58/70 have been added.
• Some additional minor bug fixes.

6.3.003

Released: 2013-02-06

• Minimum reinforcement according to EN 1992-1-1 9.3.1.1  only applies to plates with length > 5h which is corrected.
• The progarm still used the 5.3 license which is corrected.
• A new icon is implemented for the program.

6.3.002

Released: 2012-12-21

• Updated the installation file to accomodate the new StruSoft Installer.
• An error resulting in a too long anchorage length in the heel has been corrected.
• The result table for Reinforcement and Shear Check has been adjusted to be easier to read.

6.3.001

Released: 2012-10-23

• The result window for settlements has been adjusted and a warning concerning when creep effects for settlements are needed has been added.

6.3.000

Released: 2012-10-16

• New program with full support for eurocode, replacing Stödmur.