The menu option Result makes it possible to display results numerically and graphically.

Numerical result

The following information is displayed as tables.

Ground pressure check

For all ULS load cases the current and allowed ground pressure are displayed as well as the effective area and the earth pressure coefficient.

Sliding check

For all ULS load cases the resulting horizontal force and the sliding capacity are displayed.

Section forces at toe

For all load cases axial force-, moment- and shear force distribution at the toe are displayed with regard to the number of points defined by the user.

Section forces at wall

For all load cases axial force-, moment- and shear force distribution at the wall are displayed with regard to the number of points defined by the user.

Section forces at heel

For all load cases axial force-, moment- and shear force distribution at the heel are displayed with regard to the number of points defined by the user.

Reinforcement

The required reinforcement at toe, wall and heel are displayed. Note that the reinforcement is only schematically displayed.

Shear check

For the decisive load case in each direction the maximum shear force and current and allowed shear stresses are displayed.

Settlement

If a settlement calculation has been performed allowed and current settlements are displayed for all load cases. In other case the option is inactive.

Graphical result

The structure geometry, settlement data and the reinforcement distribution are displayed graphically as shown below.